7. Use half-butt hinges-that is, only one leaf is set into a mortise cut in the frame. Mark outline of hinges and chisel frame out for it. Screw hinges to frame and door.
8. Test door to see if it swings freely. If it binds, mark off high areas, whether on sides, top or base. Remove door from frame: use a plane to shave off excess.
9. Select type of lock you want and drill holes for handles and bolts. Template or pattern and instruction come with lock. Handle should be 36" to 38" above sill.
10. Door checks are used to prevent door from pulling out of hinges and to close by itself. There are many different types, complete with instruction for mounting.
11. With door in place, apply a sealer coat and then final paint coat: or stain and varnish door. Coat all edges-sides, top, and bottom-as protection from moisture.
No comments:
Post a Comment